Wiper Replacement
NWB wipers can be changed simply and easily by anyone.
The installation method changes depending on the clip, as shown below.
bayonet

hook

pin-on blade

twin-screw

wiper Caution
1. Attach blade only as instructed.
2. Vehicle design changes may unavoidably result in changes to wiper design and replacement procedures. Refer to the instructions accompanying the wiper for more information. 		3. Ensure that wiper blades are securely attached to the wiper arms, or they may come loose during vehicle operation causing damage to windshield glass or vehicle.
4. After changing wiper blades, check to ensure that the blade does not come into contact with the engine hood/bonnet during operation.
Prior to replacing blades : After replacement :
car Please stand the wiper blade up on end to remove and replace blades. Place a soft, dry cloth on the glass under the blade in order to protect the windshield from damage. driverA Phillips screw driver is required to change Twin-screw blades. wiper Double check to ensure that the wiper blades have been properly installed.
*Refer to the wiper blade package for further information regarding clip types not included in the above explanations.